higher level controls This is particularly notice able in the use of various system Drilling Machine for Plate  variables relative to tool


off sets, de scribed in de tail in the next chap ter


Always understand system variables for a particular control and machine unit


drilling Machine


There is no guarantee of compatibility between different control or machine models


Most of the ex am ples in this hand book are for the FS-15M and FS-16/18/21M con trols and


their B-ver sion, if avail able, as well as their lathe equiv a lents These two con trol groups are the


most angle machine widely used models in ma chine shops us ing macros In many ways, the mod els FS-10 and


FS-11 are very close, but expect many dif fer ent ref er ence num bers


System Variables for Fanuc Series 10/11/15


#1000 through #1035 Data In


(DI – from PMC)


#1100 through #1135 Data Out (DO – to PMC) [*]


#2000 through #2999 Tool compensation values (tool offsets) [*]


#10001 through #13999 Additional tool offsets [*]


#3000, #3006 automatic punching machine User macro generated alarm or message [*]


#3001, #3002 Clock [*]


#3003, #3004 Cycle Operation Control [*]


#3007


Mirror Image


#3011, #3012 Clock Information (time variables)


#3901, #3902 Number of parts (parts count variables) [*]


#4001 to #4130 Modal Information Pre-reading block


#4201 to #4330 Modal Information Executing block


#5001 to #5006 Block end position


#5021 to #5026 Machine coordinates position


#5041 to #5046 Work coordinates position


#5061 to #5066 Skip signal position


#5081 to #5086 Tool length compensation value


#5101 to #5106 Servo deviation


Copyright 2005, Industrial Press Inc, New York, NY – wwwindustrialpresscom


FANUC CNC Custom Macros


SYSTEM VARIABLES


141


#5201 to #5206 Work offset value (shift or common) or up to #5215 [*]


#5221 to #5226 Work offset value G54 or up to #5235 [*]


#5241 to #5246 Work offset value G55 or up to #5255