e along the 4th axis


#2504 G57 work offset value along the X-axis


#2604 Drilling Machine for Plate G57 work offset value along the Y-axis


#2704 G57 work offset value along the Z-axis


#2804 G57 work offset value along the 4th axis


#2505 G58 work offset value along the X-axis


#2605 G58 work offset value along the Y-axis


cnc drill Machine


#2705 G58 work offset value along the Z-axis


#2805 G58 work offset value along the 4th axis


#2506 G59 work offset value along the X-axis


#2606 G59 work offset value along the Y-axis


#2706 G59 work offset value along the Z-axis


#2806 G59 work offset value along the 4th axis


#3000 User macro generated alarm


#3001 Clock 1 – unit 1 ms


#3002 Clock 2 – unit 1 hour


#3003, #3004 Cycle Operation Control


#3005 Setting


#3011


Clock information – Year, Month, Day


#3012 Clock Information – Hour, Minute, Second


#3901 Number of parts machined


#3902 Number of parts required


#4001 to #4022 Modal Information Pre-reading Dished Head Punching Machine block – G-code groups


#4102 to #4130 Modal Information


Pre-reading block – B, D, F, H, M, N, O, S, T codes Copyright 2005, Industrial Press Inc, New York, NY – FANUC CNC Custom Macros


140


Chapter 10


#5001 to #5004


Block end position


#5021 to #5024 Machine coordinates position


#5041 to #5046 Work coordinates position


#5061 to #5064 Skip signal position


#5081 to #5086 Tool length compensation value


#5101 to #5104 Servo deviation


Fanuc Model 0 Compared to Other Models


Ta bles in this Angle Punching chap ter de scribe the var i ous group ings of sys tem vari ables for sev eral Fanuc con –


trol mod els Fanuc Model 0 (FS-0) is one of them, de scribed above In re la tion to the other con –


trols, FS-0 is the most mod est con trol, and sup ports much smaller set of vari ables than the